Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. It is discrete It does not include LED indicators or key fobs, and is hidden within the wiring of your vehicle.
It also permits the user to disable the system temporarily by using Transport Mode for when they are renting their vehicle. This guide will take you through the process of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning attacks and relay attacks. The system links directly to your vehicle's ECU and is secured by a unique PIN code that you choose. It is undetectable by thieves using diagnostic scanners and other advanced methods. It is not able to be disabled by cutting circuits.
The system is easy to use, however professional installation is recommended to ensure a smooth connection with the ECU of your vehicle. An approved installer from Thatcham can assist in the installation and programming of your Ghost system. what is a ghost immobiliser can also suggest a tracking system or alarm to complement your vehicle's protection package.
To avoid the accidental deployment of airbags or short circuits The installer must first disconnect your battery. After the battery has been disconnected, the installer may start working safely. Hand tools are the most basic to be used for precise connections. A multimeter is a great tool to check electrical values. Cable ties and insulation tape are also vital for protecting connections and keeping wiring neat. Lastly, the user manual offers specific instructions specific to the Ghost Immobiliser model you have.
It is important to choose a grounding location that is free of paint or debris during installation. Installers must also ensure that the immobiliser's wires CAN H & the CAN L are connected to the appropriate ECU ports. Depending on the model, these wires may require soldering or plugged into. Using a high-quality connector is recommended to ensure a long-lasting and secure connection.
Transport Mode can be turned on by the client after the installation is complete. This allows valet parking or mechanics to access the vehicle without knowing the pin code. The customer must press the icon for service on the dashboard five times within two seconds. After that the system will verify with 5 indication signals.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's a great option for those who rent their vehicles regularly on platforms like Turo. Having an immobiliser can also reduce insurance premiums, since it significantly decreases the risk of theft.
Getting Started
You won't have a problem with an autowatch immobiliser if you want to protect your vehicle from theft. The device stops your car from starting when someone copies or steals your key. This is due to its sophisticated technology that is designed to stop the engine from running unless the correct PIN code is entered.
The device works by connecting to the vehicle's CAN bus network and allowing it to communicate with the ECU directly. It uses the buttons on your dashboard and steering to create a unique sequence which only you are aware of. This makes it impossible for anyone else to start your vehicle. This is the ultimate security system that will safeguard your pride and joy and preserve its value should you decide to sell it in the future.
Installing a ghost immobiliser is an easy procedure, but it is important to follow the steps carefully to avoid problems with the electrical system and malfunctions. First, you need to find and locate a permanent 12V power source as well as an adequate grounding point on the chassis of your vehicle. Then, you can start connecting the wires to the immobiliser. Make use of high-quality connectors and soldering methods to create a secure connection. Also, make sure to insulate the connections with heat shrink tubing and insulation tape to protect them from short circuits in electrical power and other issues.
Once the wires have been connected, you can plug in the battery and start the engine to test if the immobiliser is working. Once you have verified that everything is functioning properly then you can put the immobiliser in a safe place inside the vehicle. Make sure to cover it well to ensure that thieves cannot tamper with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified this means it is in compliance with the highest standards of security and is an excellent deterrent to car thieves. It provides superior protection against key cloning, hacking, and relay attacks, and it isn't able to be disabled unless you know the code. The device is also simple to use and can be set into an auto valet mode so that your vehicle will not be activated when you take it in for service or an MOT.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to prevent vehicle theft. It connects directly to your vehicle's CAN bus network and communicates with the ECU and ECU, making it virtually undetectable to your vehicle. The Ghost Immobiliser will not interfere with the factory settings of your vehicle, unlike other aftermarket systems which require the removal of circuit elements.
It's also completely undetectable to thieves using diagnostic scanning devices. This is because the system doesn't transmit and receive radio frequency signals, and it utilizes the CAN data format to communicate with your ECU. In addition, it doesn't need any modifications to your vehicle's existing key fobs.
Enter your disarm sequence (either two or one button) and turn on the ignition in your car to activate Ghost Immobiliser. The indicator will flash twice to verify that you have entered the correct code. Now you can start your vehicle and drive safely.
Once installed, the Ghost Immobiliser safeguards your vehicle against hacking or key cloning while protecting its value. If you have to hand over your vehicle for service or valet parking The Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete the Ghost Immobiliser installation, you'll have to find a source of constant power (12V) and an earthing point. Be sure that they are well-insulated and safe to touch. Cable ties are also suggested for bundling and secure the wires. This reduces the chance of theft by thieves. To avoid committing mistakes, double-check these points and mark them with labels or tape. It's recommended to check all connections for signs wear and tear. Connectors that are loose could cause malfunctions in the system, so make certain that they are securely in place and properly insulated. Don't forget to test your Ghost Immobiliser after the installation is completed. This will ensure that the unit is working properly and that all connections and insulation are safe. If there are any issues, make certain to fix them immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that connects seamlessly with your car's ECU to prevent unauthorized motor starting. Its innovative technology safeguards your vehicle against hacking and key cloning as well as other methods commonly employed by thieves to steal cars. The Ghost also works in tandem with other alarm and tracking systems to give the best protection for your vehicle. The Ghost's unique features and secluded design make it a popular option for car enthusiasts and security-conscious drivers alike.
To ensure the proper integration of the Ghost Immobiliser, it's important to follow every step of the installation process. Check the wiring diagram of your vehicle to help you locate and connect the wires. You'll need to determine the power and grounding sources. Once you've found them, you'll have to mark them so that they are easy to locate when installing. It's important to use high-quality materials and tools. Basic hand tools can aid in making precise connections. A multimeter will verify electrical values and guarantee security. please click the next internet page and cable tie will ensure that all connections are tidy. A Ghost-specific user manual is also available.
Before beginning the installation it is essential to test the system by entering the PIN code, then starting the vehicle. This will ensure that the immobiliser is working as intended, preventing unauthorised vehicle starts. It is recommended to complete this routinely as part of your routine inspections of your vehicle to ensure that the system is working properly.
After the installation has been completed, you can start driving your car with confidence. The Ghost will safeguard your pride and joy from would-be car thieves. It will ensure that no one can escape with your car without having the correct PIN code. The Ghost can also be paired with a tracker approved by Thatcham to detect any attempts to tamper with or steal your vehicle, allowing you to locate your vehicle if it's stolen.
The Ghost is compatible with a wide variety of vehicles, including those from the majority of major manufacturers. Monty's Locksmith can assist you in securing your vehicle using this cutting-edge device. Contact us today to find out more about our services and installation options. We are a TASSA registered installer, a certificate that ensures that we adhere to strict standards in the installation of our products. This ensures customers insurance companies, customers, and law enforcement agencies that all installations are performed safely and correctly.